镁途技术顾问-李荣广

原作者: 镁途来自: 镁途收藏邀请

一、发表的文章及授权的专利：

[1] Rongguang Li*, Farhan Asghar, Jinghuai Zhang, Guangyan Fu, Qun Liu, Beitao Guo, Yongmei Yu, Shuguo Guo, Yong Su, Xuejiao Chen, Lin Zong, Microstructure evolution of extruded Mg–6Gd alloy under 175°C and 150 MPa, Acta Metallurgica Sinica-English Letters, 32 (2019) 245-252.

[2] R.G. Li, H.B. Shafqat, J.H. Zhang, R.Z. Wu, G.Y. Fu, L. Zong, Y. Su, Cold-working mediated converse age hardening responses in extruded Mg-14Gd-2Ag-0.5Zr alloy with different microstructure, Materials Science and Engineering A 748 (2019) 95-99.

[3] Rongguang Li, Jinghuai Zhang, Guangyan Fu, Lin Zong, Beitao Guo, Yongmei Yu, Shuguo Guo, An Unusual Texture Evolution in Extruded Mg-14Gd-based Alloy during Annealing, Advanced Engineering Materials, Document Number: 201701129, Page:1-5.

[4] Rongguang Li, Jinghuai Zhang*, Guangyan Fu, Lin Zong, Beitao Guo, Yongmei Yu, Yong Su,Yongsheng Hao, Different precipitation hardening behaviors of artificial aging and creep processes, Materials Science and Engineering A 715 (2018) 186-193.

[5] Rongguang Li*, Guangyan Fu, Zeren Xu, Yong Su, Yongsheng Hao, Effect of dynamically recrystallized grains on rare earth texture in magnesium alloy extruded at high temperature, Advanced Engineering Materials, Document Number: 201700818, Page:1-5.

[6] Rongguang Li, Renlong Xin*, Qing Liu*, Adrien Chapuis, Shifeng Liu, Guangyan Fu, Lin Zong, Effect of grain size, texture and density of precipitates on the hardness and tensile yield stress of Mg-14Gd-0.5Zr alloys, Materials and Design 114 (2017) 450-458.

[7] Rongguang Li*, Renlong Xin*, Adrien Chapuis, Qing Liu, Guangyan Fu, Lin Zong, Yongmei Yu, Beitao Guo, Shuguo Guo, Effect of cold rolling on microstructure and mechanical property of extruded Mg-4Sm alloy during ageing, Materials Characterization 112 (2016) 81-86.

[8] R.G. Li*, R.L. Xin*, Q. Liu, J.A. Liu, G.Y. Fu, L. Zong, Y.M. Yu, S.G. Guo, Effect of Ag addition on microstructure and mechanical properties of Mg-14Gd-0.5Zr alloy, Materials Characterization 109 (2015) 43-49.

[9] R.G. Li*, H.J. Zhang, G.Y. Fu. Microstructure and mechanical properties of extruded Mg₉₆Zn₁Y₃ alloy. Materials Characterization 98 (2014) 107-112.

[10] R.G. Li, J. F. Nie, G. J. Huang, Y. C. Xin, Q. Liu*. Development of high strength magnesium alloys via combined processes of extrusion, rolling and ageing, Scripta Materialia 64 (2011) 950-953. 该文章入选了Scripta Materialia杂志2011年全年top25文章，它引102次。

[11] R.G. Li, D. Q. Fang, J. An*, Y. Lu, Z. Y. Cao, Y. B. Liu. Comparative studies on the microstructure evolution and fracture behavior between hot-rolled and as-cast Mg₉₆ZnY₃ alloys, Materials Characterization 60 (2009) 470-475.

[12] R.G. Li, J. An*, Y. Lu. Friction and wear characteristics of Mg-11Y-2.5Zn magnesium alloy treated by laser surface melting, Surface Engineering 26 (2010) 347-353.

[13] R.G. Li, Y. Xu, W. Qi, J. An*_,Y. Lu, Z. Y. Cao, Y. B. Liu. Effect of Sn on the microstructure and compressive deformation behavior of the AZ91D aging alloy. Materials Characterization 59 (2008) 1643-1649.

[14] J. An*, R.G. Li, Y. Lu, C.M. Chen, Y. Xu, X. Chen, L.M. Wang. Dry sliding wear behavior of magnesium alloys, Wear 265 (2008) 97-104. （博士导师为第一作者）

[15] J. An*, R.G. Li, C. M. Chen, Y. Xu, X. Chen, Z. X. Guo, Y. B. Liu. Comparative studies on wear behaviour between as cast AZ91 and Mg₉₇Zn₁Y₂ magnesium alloys. Materials Science and Technology 23 (2007) 1208-1214. （博士导师为第一作者）

[16] X. D. Niu, D. Q. An, X. Han, W. Sun, T. F. Su, J. An & R. G. Li*. Effects of Loading and Sliding Speed on the Dry Sliding Wear Behavior of Mg-3Al-0.4Si Magnesium Alloy. Tribology Transactions 60 (2017) 238-248. （通讯作者）

[17] J. An, J.H. Feng, X.H. Yan, R.G. Li*, Tribological Behavior of Mg97Zn1Y2 Alloy at Elevated Temperatures of 50-200 °C, Journal of Materials Engineering & Performance, 26 (2017) 4940-4952. （通讯作者）

[18] Jiaan Liu, Qingxiang Qu, Yan Liu, Rongguang Li, Bing Liu. Compressive properties of Al-Si-SiC composite foams at elevated temperatures. Journal of Alloys and Compounds, 676 (2016) 239-244.

[19] Z.G. Su, R.G. Li, J. An*, Y. Lu. Effect of rolling temperature on the microstructures and Mechanical properties of Mg₉₇Zn₁Y₂ magnesium alloy. Journal of Materials Engineering and Performance 19 (2010) 70-76.

[20] Jing jiang, Gaungli Bi, Lei Zhao, Rongguang Li, Jianshe Lian, Zhonghao Jiang*. Dry sliding wear behavior of extruded Mg-Sn-Yb alloy. Journal of Rare earth, 33 (2015) 77-85.

[21] Xiao-mei LUO, Guang-li BI*, Jing JIANG, Ming LI, Rong-guang LI, Yuan-dong LI, Ying MA, Yuan HAO, Compressive anisotropy of extruded Mg−Dy−Zn alloy sheet, Transactions of Nonferrous Metals Society of China 26 (2016) 390-397.

[22] Fang DQ, Jiang ZH, Bi GL, Li RG, Li GY*. Microstructures and mechanical properties of extruded Mg-1Mn-3.5Y and Mg-1Mn-1Y-2.5Nd alloys.Transactions of Nonferrous Metals Society of China, 20 (2010) 555-560.

[23] B.S. Wang, Y.B. Liu, J. An, R.G. Li , Z.G. Su, G.H. Su, Y. Lu, Z.Y. Cao*. Morphologies of Microstructure in Mg₉₇Zn₁Y₂ Ribbon upon Ageing at Different Temperatures. Materials Transactions, 49 (2008) 1768-1774.

[24] B.S. Wang, Y.B. Liu, J. An, R.G. Li, Z.G. Su, G.H. Su, Y. Lu, Z.Y. Cao*. Evolution of the Microstructure and Hardness of a Rapidly Solidified/Melt-Spun AZ91 Alloy upon Aging at Different Temperatures, Materials Characterization, 60 (2009) 316-321.

[25] WANG Bai-shu, LIU Yong-bing, AN Jian, LI Rong-guang, SU Zhen-guo, CAO Zhan-yi, Morphological evolutions of cast and melt-spun Mg₉₇Zn₁Y₂ alloys during deformation and heat-treating, Transactions of Nonferrous Metals Society of China 18(2008) 69-75.

[26] J. An, X.X. Shen, Y. Lu, Y.B. Liu, R.G. Li, C.M. Chen, M.J. Zhang, Influence of high current pulsed electron beam treatment on the tribological properties of Al–Si–Pb alloy, Surface & Coatings Technology 200 (2005) 5590-5597.

[27] X.X. Lv, R.G. Li , An J*. Numerical simulation of thermal-mechanical process of Al-Si-Pb alloy treated by high current pulsed electron beam. Transactions of Nonferrous Metals Society of China 16 (2006) 1433-1436.

[28] Beitao Guo, Zhongyu Zhang, Rongguang Li, Ultrasonic and eddy current non-destructive evaluation for property assessment of 6063 aluminum alloy， Nondestructive Testing and Evaluation International 93 (2008) 34-39.

[29] Guangyan Fu, Yongzhao Wu, Qun Liu, Rongguang Li, Yong Su, Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating, High Temperature Materials & Processes, 36 (3) (2017) 243-248.

[30] 安健*, 李荣广, 陈春梅, 陆有, 刘勇兵. 强流脉冲电子束表面改性Al-Pb合金的摩擦磨损行为研究, 摩擦学学报 27 (2007) 97-101.（博士导师为第一作者）